STAGE ONE:- BODY CHASSIS $12,500

Doors, boot lid and bonnet are double skinned and have intrusions to accept mountings. Doors are produces with provision for ADR burst proof locks.

The chassis has torsional stiffness. This is helped by incorporating high tensile gauge steel sections ensuring strengh. The steering geometry is such that it complements the chassis, therefore giving greater road holding, direct steering and very good braking and traction.

All mounting points on the chassis have been jigged in place during the fabrication of the chassis. Fittings supplied with chassis are: under dash frame, door hinges, radius arms, bonnet hinges, diff support plate and front spring mounts. There is no fabrication or lamination required.

G-FORCE SPORTS CARS can supply specially made components to suit the roadster and are virtually impossible to distinguish from the original. Some are perfect replica parts. For example: windscreen, dashboard, front and rear bumpers, overriders, lights, seats, roll bars and wind wings.

For more information send $5.00 for a brochure to
G-Force Sports Cars WA
Unit 5/31 Peel Rd
O'Connor, Perth Western Australia 6163

• Stage One
• Stage Two
• Stage Three
• Stage Four
• Stage Five

R.D. GRAVE
Phone:  (08) 9331 2509
Mobile:  0412 244 691

G-Force Sports Cars WA Factory
Unit 5/31 Peel Rd
O'Connor, Perth Western Australia 6163